The 3D Pen for freehand drawing of 3D objects
0.4 mm Nozzle and Uses ABS 1.75mm ABS/PLA Material
Ergonomic design for optimum handling
Adjustable output speed, Durability
In many paint colors: filament is changed easily by pressing a button
LED indicator to check the operating temperature
Input: AC 110V-220V
Output: DC 5V 2A
Nozzle Diameter: 0.7mm
Output Materials Type: Fused Deposition Modeling
Molding Method: 3D Modeling
Printing Area: Unlimited
Sprinkle Speed: Adjustable
Heating Temperature: 160 to 230 Degree Celsius (Adjustable)
Material: Plastic case cover
Dimensions: 187 * 44 * 30 mm
What Is in Package?
1*5V/2A USB Data Line
1*9Meter PLA Filament
1*100 Meter PLA Filament(20 Color*5 Meter=100 Meter)
1.Connect USB Adapter
Connect The Power Adapter And USB Line,Power Adapter inserts into the aocket,USB insert into Charging Port,LED Screen And LED Light On.The 3D Pen Is Power On,the Nozzle will heatting,and enter to standby state.
After The Nozzle Heat,and the temperature will stay in the ABS Or PLA Temperature,Then pressing the filament Loading button,then the filament will be conveyed by the buil-in mmotor.when the filament come out from the nozzle,it shows loading successfully.
pree the Speed Change Key Stepless,and the speed will higher and higher or slower or slower.
Click The filament loading button,the filament come out from the nozzle smoothly,then you can draw the objects according to your imagination.
5.Unloading the filament
Double click the filament unloading button,the filament will be automatically unloaded.
Power On And The Equipment will Heat Automatic And will be High The Temperature,then you can Use the ABS FIlament.If you want to use the PLA Filament,Then You should Click The Below Key And the temperature Will Low To be The PLA Temperature.If you want to use ABS Again,so Click The Up Key.
When You are drawing your work,you can Press the Speed change Key to change the working speed smoothly as your need,you can press it up smoothly and the loading filament will turn to be slow stepless,if you press it down smoothly and the filament loading will turn to be fast stepless.
After nozzle Heat to the sure temperature,put in the filament to the Feed Port,and Long press the load filament button,the filament will be melted and come out from the nozzle,mean that filament loading is success.when the filament loading success,start creating.if you finish creating ,click the Exit Button to unload the filament.